14 November 2010

Nervi Bridges: 1. Early bridges

Pier Luigi Nervi (1891-1979) was one of the greatest Italian structural engineers of the twentieth century. Indeed he was one of the greatest designers anywhere in the world, a pioneer of large-scale reinforced concrete roof structures, highly successful as the engineer, architect and builder of his own works.

His many astonishing designs include St Mary's Cathedral in San Francisco, the Palazzo and Palazzetto del Sport in Rome (the former is pictured, right, courtesy of Jeroen Meijer on Flickr), the Papal Audience Hall in the Vatican, and exhibition buildings in Turin.

A hallmark of his approach was the use of ribbing to stiffen thin-shell construction, leading to geometrically intricate vaulting reminiscent of the Gothic architecture that Nervi undoubtedly admired.

Unlike his contemporary and compatriot Riccardo Morandi, Nervi is less well known for his bridge designs. Nonetheless, he produced enough of interest that I'm going to cover them in a short series of posts here.

Nervi designed several reinforced concrete bridges early in his career. I've found references to:
  • Bridge over River Cecina, Pomarance, Pisa (1920-22, demolished 2001)
  • Bridge over Pescia Creek, Pistoia (1922-23)
  • Widening of Bisenzio Bridge, Prato, Florence (1923-32)
  • Fosso Biedano, Rome (1934, unbuilt)
  • Bridge at Arno (1945, unbuilt)
  • Reno, near Sasso Marconi, Nologna (1951, unbuilt)
  • River Tenza, Salerno (1955, unbuilt)
The proposed bridge at the Fosso Biedano was a reinforced concrete trestle viaduct. The A-frame legs stiffen the curved deck against centrifugal forces, while the three levels of bracing serve to reduce the buckling length of the frame columns.

I'm not aware of many concrete trestle bridges which were built: this was a design essentially harking back to the great timber trestle viaducts of the 19th century.


Two decades later, Nervi's plan for a bridge over the river Tenza was equally unconventional. According to The Works of Pier Luigi Nervi, the designer's main challenge was to reduce the amount of scaffolding required for a viaduct which was some 50m above the valley floor.

The 319m long viaduct had trestle supports at a maximum 50m interval, four with identical geometry and hence the option to reuse the falsework and formwork. These trestles support main concrete cantilever beams, which vary in width, having a thicker web above their support positions, where the shear is highest.

The cantilever beams in turn support precast span beams, lifted into position from ground level. These span only 16m, sitting on roller bearings on their half-joints.

In 1947, Nervi designed the roof structure for the Conte Trossi Wharf in Genoa, which if not a bridge, was certainly bridge-like. The relationship of the reinforced arch to the "deck" slab above is more than a little reminiscent of Robert Maillart's bridge design at Tavanasa.

In 1959, Nervi published a critique of five bridges (Cinque ponti), discussing the Salginatobel Bridge, Rodenkirchen Bridge, Golden Gate Bridge, Elbe River Bridge, and a bridge project by Paolo Soleri. Nervi used his critique to contrast two possible methodologies for structural design:
  1. "designers, following the statical, constructive and economical needs, and within the margins of freedom in defining structural and formal details, which they always and anyway concede, try to express their own aesthetic sensibility."

  2. "designers start from a purely formal conception, very close to what sculptors could have, and then begin to improve it, with the sub-conscious thought that the 'calculator' will manage to make it stand and the constructor will be able to build it."
Evidently, Nervi supported only the first of these choices.

Further information:
  • Wikipedia (Italy) (Ponte sul fiume Cecina)
  • The Works of Pier Luigi Nervi, Pier Luigi Nervi, The Architectural Press, 1957 (Biedano, Conte Trossi Wharf, Tenza)
  • Pier Luigi Nervi, Ada Huxtable, Mayflower, 1960 (Conte Trossi Wharf, Tenza)
  • Pier Luigi Nervi, bridge designer [PDF], Manuel Cresciani, IASS Symposium 2007

4 comments:

Anonymous said...

Hi, I'm doing a 3D rendering of the bridge over the river Tenza for my graduation in civil engineering. I'd like to konw if I can find others designs of this bridge in the book "Pier Luigi Nervi, Ada Huxtable, Mayflower, 1960" (I've already found some designs in "The Works of Pier Luigi Nervi, Pier Luigi Nervi, The Architectural Press, 1957"). Thanks,
Antonio

The Happy Pontist said...

The elevation of the bridge shown above is from Huxtable. Huxtable also shows a photo of the bridge model from another angle, but that's the only other image.

Pier Luigi said...

Hi. I'am writing to correct an inaccuracy. The bridge over the Bisenzio river in Prato is not by Pier Luigi Nervi but by Giulio Krall. If you want to learn more: https://provinciadiprato.wordpress.com/2017/03/19/passerella/
(You can read there an english presentation of the work by himself)
The same engineer, Krall, is the author of the project that won the contract for the construction of the bridge over the "fosso Biedano" (instead of the Nervi's one shown in the blog). here's the picture when the bridge had just been built. https://images.app.goo.gl/mBTuZh3E7JBk9B6g9
News about it, people can find in some national magazines from the 1930s, or even in an English magazine: "Concrete and constructional engineering", May 1939 pages. 290-291("Novel falsework for a large arch bridge").

The Happy Pontist said...

Thank you for this additional information!